













*Each state and territory in Australia has a different set of rules and regulations pertaining to the usage of e-Scooters / E-Bikes or E-Motos (including where these types of products can legally be used and whether they need to be registered with the relevant road traffic authority). It is the responsibility of the user to ensure that they check and abide by their local laws and use responsibly.
Eazybikes Australia do not take any responsibility for the use of eScooters/E-Bike or E-motos in Australia. Have fun but ride with caution and always wear a helmet.
The Vectron V1 is a heavy-duty off-road tool that delivers huge power, shock absorption and weight bearing capacity. It has a range of off-road capabilities, including Hard Enduro riding and farming/utility work with the ability to handle heavy loads and an aggressive riding style.

A rider landing a jump creates a dynamic load that multiplies their weight by three or four times. The Vectron's frame is engineered to absorb these violent, sudden spikes for a higher Dynamic Safety Margin.

Reduced stress and vibration protect the frame from metal fatigue (micro-strains in the metal over time) for a longer typical lifespan.

The high yield frame eliminates frame flex, transferring lateral stress to the suspension for tracking that's more predictable and precise.

With 380Nm of torque, the Vectron excels at technical off-road riding. The high torque generates precise control, allowing you to crawl at lower speeds without jerky stalling or a slipped clutch. This also means it can maintain acceleration even with a heavy load.

The Vectron V1 is designed with efficient weather resistance. Can be ridden in rain, mud puddles and short-term wading through 20cm deep water.
Note: not designed for prolonged exposure in deep water, complete submersion or direct spraying of high-pressure hoses.

Dimensions -1855mm x 790mm x 1050mm (L x W x H)
Frame & Fork -6061 Wrought Aluminum Alloy Welded Structure
Handlebar - 7075 alloy φ28.6 × 22.2mm
Battery Specifications - 73.6V 33.8Ah LG Cell
Battery Weight - 13.8kg
Motor Rated Power - 3.0kW
Motor Max Power - 6.0kW
Motor Max Speed - 6800rpm
Vehicle Power Mode - Manual push-button shift — 3x Gears
Max Speed
Gear 1— 25km/h
Gear 2— 60km/h
Gear 3 — 80km/h
Max Mileage on Flat Road - Greater than 100km @ 50km/h constant speed (75kg Rider)
Max Mileage Off Road - Greater than 40km @ full power (75kg Rider)
Max Climbing Angle - 45°
Max User Weight - 100kg
Chain Specifications- 420DX-122
Wheelbase- 1250mm
Front/Rear Tire Size- 70/100-19
Front/Rear Rim Specification- 7116 alloy 1.6-19
Braking System- 4 Piston Hydraulic φ203 × 2.3mm disk
Front/Rear Braking Force- ≥500N
Seat Height- 830mm
Min Ground Clearance- 270mm
Shock Absorber - Left: Multi-stage spring inverted damping with adjustable precompression, 165mm stroke
Right: Adjustable damping oil-gas composite inverted damping, 165mm stroke
Rear Suspension System- Lower rocker multi-link mechanism
Rear Shock Absorber- Adjustable damping oil-gas composite inverted damping, 165mm stroke
Rear Reduced Piston Rod Diameter - 12mm
Total Vehicle Weight- 62.8kg
Weather Resistance Motor - IP55
Cable & Connector - IP55
Battery - IP67
Controller- IP67