There is a 250w front-geared motor, and a 350w rear-geared motor.
The system is operated by a single battery that locks into position, a single controller, and a single set of controls that are at the front. To operate the system is simple: on the right side of the handlebars is a red rocker switch where you get to choose which motors to operate. The throttle and pedal assist function like any other - driving the wheels depending on the position of the rocker switch. With the switch positioned in the middle - both motors will be functioning. When turned to the left, only the front motor will be switched on, and when turned right—the rear motor.
A hub motor in the front wheel can crank out a continuous 250W watts of power with the ability to ratchet things up to over 350 peak watts of power for hill climbs and quicker acceleration. This motor has 45 Newton meters of torque.
A hub motor in the rear wheel can crank out a continuous 350W watts of power with the ability to ratchet things up to over 500 peak watts of power for hill climbs and quicker acceleration. This motor has 60 Newton meters of torque.
Free bike build when picked up from store.
Free first bike service.
Test ride before you buy!
OFF ROAD USE ONLY
Aluminum alloy 6061
48V/250W 350W brushless DC hub motor installed in front & rear wheel
Alloy Suspension Suntour
Kenda Krusade Sport Tires 26 x 4.0 with K-Shield Protection
Promax DISC Brakes Front 160mm and Rear Disc Brake 160mm with Motor Cut-Off Sensor in Brake Handles